Mitsubishi 2015 OUTLANDER SPORT/RVR Owner's Manual page 254

NOTE
 Sometimes, for example after using a high-
pressure car wash, the condenser can get wet,
and the air conditioning indicator light (A)
blinks temporarily. Wait for a while, press
the air conditioning switch once to turn the
system off, then once more to turn it back on.
Once the water evaporates, the blinking will
stop.
Operating the air conditioning
system
Heating
Set the mode selection dial to the "
tion and set the air selection switch (A) to the
outside air position.
Turn the temperature control dial clockwise
or counterclockwise to the desired tempera-
ture. Select the best speed to fit your needs.
NOTE
N00731101287
 For quick heating, set the blower speed
selection dial to the position shown in the
illustration.
" posi-
I n f o r ma t i o n P r o v i d e d b y :
Manual air conditioning-Type 1 (if so equipped)
Cooling
For ordinary cooling
1. Set the mode selection dial to the "
position.
2. Push the air selection switch (A) to set it
to the outside air position.
3. Push the air conditioning switch (B).
4. Change the temperature by turning the
control dial clockwise or counterclock-
wise.
5. Set the desired blower speed.
NOTE
 If the outside air is dusty or contaminated in
some way, push the air selection switch (A)
to set it to the recirculation position. Let in
some outside air from time to time for good
ventilation.
Comfort controls
N00731201350
7
"
7-7