Mitsubishi 2015 OUTLANDER SPORT/RVR Owner's Manual page 153

Multi-information display
Type 1
When there is no warning display
5
When there is a
warning display
Type 2
When there is no warning display
When there is a
warning display
5-90 Features and controls
1- Odometer (Type1)/Trip odometer
2- Odometer (Type1)/Trip odometer
3- Service reminder
Engine coolant temperature display
4-
(Type 1)
5- Driving range display (Type 1)
6- Average speed display, average fuel
consumption display, momentary fuel
consumption display (Type 1)
7- Driving range display, momentary fuel
consumption display (Type 2)
8- Average fuel consumption display,
momentary fuel consumption display
(Type 2)
9- Average speed display, momentary fuel
consumption display (Type 2)
10- Function setting screen
11- Redisplay of a warning display screen
NOTE
 While driving, the function setting screen is
not displayed even if you operate the multi-
information meter switch. Always park the
vehicle in a safe place before operating.
Refer to "Changing the function settings
(With ignition switch or operation mode in
ON)" on page 5-98.
I n f o r ma t i o n P r o v i d e d b y :
NOTE
 When there is information to be announced,
such as a system fault, the tone sounds and
the screen display is switched.
Refer to "Interrupt display screen (With igni-
tion switch or operation mode in ON)" on
page 5-93.
Odometer/Trip odometer
The operation method is the same as when
the ignition switch or the operation mode is in
OFF.
For further details, refer to "Odometer/Trip
odometer" on page 5-86.
Service reminder
Shows the distance and number of months
until the next periodic inspection.
Refer to "Service reminder" on page 5-96.
Engine coolant temperature dis-
play
Shows the engine coolant temperature.
If the coolant becomes hot, " " will blink.
Pay careful attention to the engine coolant
temperature display while you are driving.