Mitsubishi 2015 OUTLANDER SPORT/RVR Owner's Manual page 163

Multi-information display
Auto reset mode
 When the average fuel consumption and
average speed are being displayed, if you
hold down the multi-information meter
switch, these calculations will be reset to
zero.
5
 When the engine switch or the operation
mode is in the following conditions, the
average fuel consumption display and the
average speed display will automatically
reset.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch has been set to the
"ACC" or "OFF" position for about 4
hours or more.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode has been in ACC or
OFF for about 4 hours or more.
NOTE
 Disconnecting the battery cable will erase
from memory the manual reset mode or auto
reset mode setting for the average speed dis-
play and average fuel consumption display.
 The initial (default) setting is "Auto reset
mode".
5-100 Features and controls
Changing the fuel consumption
display unit
The fuel consumption display unit can be
changed. The distance, speed, and amount
units are also changed to match the selected
fuel consumption unit.
1. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to change from the setting mode
screen to the menu screen.
Refer to "Changing the function settings
(With ignition switch or operation mode is
in ON)" on page 5-98.
2. Lightly press the multi-information meter
switch to select "AVG UNIT" (fuel con-
sumption display unit setting).
Type 1
Type 2
I n f o r ma t i o n P r o v i d e d b y :
3. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to display "AVG UNIT" (fuel con-
N00557100143
sumption display unit setting).
4. Lightly press the multi-information meter
switch to switch in sequence from km/L
 L/100 km  mpg (US)  mpg (UK)
 RETURN  km/L.
Type 1
5. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to change the setting to the selected
unit.
Type 2