Mitsubishi 2015 OUTLANDER SPORT/RVR Owner's Manual page 156

 When the engine switch or the operation
mode is in the following conditions, the
average fuel consumption display will
automatically reset.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch has been set to the
"ACC" or "OFF" position for about 4
hours or more.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode has been set to ACC
or OFF for about 4 hours or more.
NOTE
 The average speed display and the average
fuel consumption display can be reset sepa-
rately in both auto reset mode and manual
reset mode.
 "---" is displayed when the average fuel con-
sumption cannot be measured.
 The initial (default) setting is "Auto reset
mode".
 Average fuel consumption may vary depend
on the driving conditions (road conditions,
how you drive, etc.) The actual fuel con-
sumption may differ from the fuel consump-
tion displayed, so treat the fuel consumption
displayed as just a rough guideline.
NOTE
 Disconnecting the battery cable will erase
from memory the manual reset mode or auto
reset mode setting for the average fuel con-
sumption display.
 The display setting can be changed to the
preferred units {mpg(US),
L/100km or km/L}.
Refer to "Changing the function settings
(With ignition switch or operation mode in
ON)" on page 5-98.
Momentary fuel consumption dis-
play
While driving, the momentary fuel consump-
tion is shown with a bar graph.
When the momentary fuel consumption sur-
passes the average fuel consumption, the
momentary fuel consumption is displayed
with a green bar graph. (Type 2)
Be conscious of maintaining the momentary
fuel consumption above the average fuel con-
sumption, it can help you drive with the better
fuel consumption.
NOTE
 When the momentary fuel consumption can-
not be measured, a bar graph is not shown.
I n f o r ma t i o n P r o v i d e d b y :
Multi-information display
NOTE
 The display setting can be changed to the
preferred units
L/100km or km/L}.
Refer to "Changing the function settings
(With ignition switch or operation mode in
ON)" on page 5-98.
mpg(UK),
 It is possible to cancel the green bar graph.
Refer to "Changing the function settings
(With ignition switch or operation mode in
ON)" on page 5-98.
Function setting screen
The "Display language", "Temperature unit",
"Fuel consumption unit", and "Average fuel
consumption and speed reset method" set-
tings can be modified as desired.
For further details, refer to "Changing the
function settings (With ignition switch or
operation mode in ON)" on page 5-98.
Interrupt display screen (With
ignition switch or operation
mode in ON)
Warning display
When there is information to be announced,
such as a system fault, a tone sounds and the
Features and controls
{mpg(US), mpg(UK),
5
N00556300180
5-93