Mitsubishi 2015 OUTLANDER SPORT/RVR Owner's Manual page 152

Service reminder
When the time for periodic inspection arrives,
the warning display is displayed for a few
seconds after the screen that is initially dis-
played when the ignition switch is turned
"ON" or the operation mode is changed to
ON.
Refer to "Service reminder" on page 5-96.
Type 1
Type 2
Drive mode indicator display
screen
(if so equipped)
Shows the 4WD drive status.
Refer to "Drive mode-selector" on page 5-56.
Warning display screen
(With ignition switch or opera-
tion mode in ON)
This is displayed when you press the multi-
information meter switch and switch the
warning display screen.
This mark is also displayed if there is another
warning other than the one displayed.
When the cause of the warning display is
eliminated, the warning goes out automat-
ically.
NOTE
 When the warning is displayed, the warn-
ing display screen can be redisplayed on the
information screen.
Refer to "Information screen (With ignition
switch or operation mode in OFF)" on page
5-85.
Refer to "Information screen (With ignition
switch or operation mode in ON)" on page
5-89.
N00555900020
I n f o r ma t i o n P r o v i d e d b y :
Multi-information display
"Active stability control (ASC)
OFF" display screen
equipped)
N00555200182
This is displayed when the Active stability
control (ASC) is turned "OFF" with the
"ASC OFF" switch.
Also, if an abnormal condition is occurred in
the ASC while driving, the "ASC OFF" dis-
play illuminates.
Refer to "ASC OFF switch" on page 5-69.
Information screen (With igni-
tion switch or operation mode
in ON)
Each time you lightly press the multi-infor-
mation meter switch, the display screen
switches in the following order.
Features and controls
(if so
N00556100117
5
N00556201245
5-89