Figure 59: Network Adapters On Windows Server 2003 & Xp - Allied Telesis AT-2911SX/ST User Manual

AT-2911 Series Gigabit Ethernet Network Adapters Installation and User's Guide
2. In the Device Manager window, right-click the device you wish to
update. It may be listed as Allied Telesis AT-2911xx Gigabit Fiber
Ethernet or as a Broadcom Device.
The shortcut menu appears as shown in Figure 59.
Figure 59. Network Adapters on Windows Server 2003 & XP
3. Select Update Driver.
The Hardware Update Wizard window pops up as shown in Figure 54
on page 93.
4. Select No, not this time.
5. Click Next.
The Hardware Update Wizard prompts you to select one of two options
as shown in Figure 55 on page 94.
6. Select Install from a list or specific location (Advanced).
7. Click Next.
The Hardware Update Wizard prompts you to specify the location of
your driver software as shown in Figure 56 on page 95.
8. Specify the location of the driver software that you downloaded from
Allied Telesis website.
99