Chapter 3: Modifying Advanced Properties
Large Send Offload v2 (IPv6)
60
The Large Send Offload v2 (IPv6) feature allows you to control the load of
sending out large packets. When this feature is enabled, the AT-2911
adapter segments large packets for IPv6 traffic and reduces the CPU load.
To enable or disable the Large Send Offload v2 (IPv6) feature, do the
following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 43.
2. Select Large Send Offload v2 (IPv6) in the Property box.
The Large Send Offload v2 (IPv6) page is displayed as shown in
Figure 28.
Figure 28. Large Send Offload (IPv6) Page
3. Select one of the following options:
Disabled — The adapter does not segment packets for IPv6
traffic.
Enabled — The adapter segments large packets up to 256kb for
IPv6 traffic before sending them out. This is the default setting.
4. Click OK.