Flow Control; Figure 22: Flow Control Page - Allied Telesis AT-2911SX/ST User Manual

Flow Control

AT-2911 Series Gigabit Ethernet Network Adapters Installation and User's Guide
The Flow Control feature allows you to control the flow between the
AT-2911 adapter and its link partner. You can enable or disable the
adapter to process received PAUSE frames and transmit PAUSE frames.
To enable or disable the Flow Control feature, do the following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 43.
2. Select Flow Control in the Property box.
The Flow Control page is displayed as shown in Figure 22.
Figure 22. Flow Control Page
51