Receive Buffers; Figure 32: Receive Buffers Page - Allied Telesis AT-2911SX/ST User Manual

Chapter 3: Modifying Advanced Properties

Receive Buffers

66
The Receive Buffers property specifies the number of receive buffers
allocated for the adapter. Increasing this value may enhance performance
in receiving traffic, but consumes more system memory.
To change the Receive Buffers value, do the following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 43.
2. Select Receive Buffers in the Property box.
The Receive Buffers page is displayed as shown in Figure 32.
Figure 32. Receive Buffers Page
3. Select one of the following options:
 Default — Specifies the default number of receive buffers
allocated to the adapter. This is the default setting.
 Maximum — Specifies the maximum number of receive buffers
allocated to the adapter.
 Minimum — Specifies the minimum number of receive buffers
allocated to the adapter.
4. Click OK.