Allied Telesis AT-2972T/2 Datasheet

Datasheet | Network Interface Cards
AT -2972T/2
PCI-Express Dual Port Copper Gigabit Interface Card
AT -2972T/2
PCIe x 4 (channels) dual port copper Gigabit
interface card
More Bandwidth with PCI-Express
Interface
The PCI-Express (PCIe) design gives you the
maximum possible bandwidth and bus efficiency.
Other benefits are capability and low power
consumption.
High Reliability
The AT-2972T/2 Gigabit interface card comes
with a comprehensive Microsoft Windows
utility that performs detailed tests, diagnostics
and analysis.
Allied Telesis
Advanced Manageability
The priority queuing offered by AT-2972T/2 can
help you set-up your network based on your
own needs.The comprehensive diagnostics and
configuration software suite provides system
adminstrators and engineers with a profound
tool to analyze the interface card to check
specific data.
Dual Port Copper Interfaces
Two copper port interfaces give you the
maximum protection against failure. If one link
goes down, the other keeps sending data to
prevent network down time.The two ports
can also be trunked to increase bandwidth in
server type applications.
Key Features
Management Software
• Virtual cable tester
• VLAN support
• Link aggregation LACP
• Link aggregation smart switch
• Failover
Advance Properties
• Jumbo frames (9K)
• Checksum offloading
• PCI-Express (PCIe)
• Windows Vista
• IEEE 802.1x flow control
• IEEE 802.1p-based traffic prioritization
• PXE remote boot support
• Wake-on-LAN (WoL)
• Low-profile and standard height brackets
included
• Microsoft certified drivers
• RoHS compliant
• Load balancing
• On-board 78KB memory
• CPU task offload
• TCP segmentation
• SNMP
• IPv6
www.alliedtelesis.com