Vmq Vlan Filtering; Figure 41: Vmq Vlan Filtering Page - Allied Telesis AT-2911SX/ST User Manual

VMQ VLAN Filtering

AT-2911 Series Gigabit Ethernet Network Adapters Installation and User's Guide
The VMQ VLAN Filtering feature allows the adapter to filter data packets
using the VLAN ID in the media access control (MAC) header to improve
networking performance and reduce CPU utilization. This feature applies
to host computers with Windows Server 2008 R2 or Windows 7 64 bit
operating systems only. To make this feature effective, the host computer
must be set in virtual environment.
To enable or disable the VMQ VLAN Filtering feature, do the following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 43.
2. Select VMQ VLAN Filtering in the Property box.
The VMQ VLAN Filtering page is displayed as shown in Figure 41.
Figure 41. VMQ VLAN Filtering Page
3. Select one of the following options:
 Disable — The feature is disabled. This is the default setting.
 Enable — The adapter filters data packets using the VLAN ID in
the MAC header.
4. Click OK.
79