Uninstalling The Driver Software; Figure 60: Confirm Device Uninstall Window - Allied Telesis AT-2911SX/ST User Manual

Uninstalling the Driver Software

AT-2911 Series Gigabit Ethernet Network Adapters Installation and User's Guide
To uninstall the driver software from your operating system, do the
following:
1. Start your Windows operating system and log in.
2. Access the Device Manager.
See "Accessing the Device Manager" on page 85.
3. In the Device Manager window, click the  next to the Network
Adapters folder.
Note
For the Windows XP operating systems, click the + next to the
Network Adapters folder to expand the Network Adapter folder.
The selection expands to show the list of installed network adapter
cards.
4. Right-click Allied Telesis AT-2911xx Gigabit Fiber Ethernet.
The shortcut menu appears. See Figure 58 on page 98.
5. Select Uninstall.
The Confirm Device Uninstall window pops up as shown in Figure 60.
Figure 60. Confirm Device Uninstall Window
6. Check the check box if you want to remove the driver software for your
adapter.
Note
This option is available only for Windows Server 2008, Windows 7,
and Windows Vista operating systems.
103