Large Send Offload V2 (Ipv4); Figure 27: Large Send Offload V2 (Ipv4) Page - Allied Telesis AT-2911SX/ST User Manual

Chapter 3: Modifying Advanced Properties

Large Send Offload v2 (IPv4)

58
The Large Send Offload v2 (IPv4) feature allows you to control the load of
sending out large packets. When this feature is enabled, the AT-2911
adapter segments large packets for IPv4 traffic and reduces the CPU load.
This feature, which supports large packets up to 256kb, overrides the
Large Send Offload (IPv4) feature if both features are enabled.
To enable or disable the Large Send Offload v2 (IPv4) feature, do the
following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 43.
2. Select Large Send Offload v2 (IPv4) in the Property box.
The Large Send Offload v2 (IPv4) page is displayed as shown in
Figure 27.
Figure 27. Large Send Offload v2 (IPv4) Page