Fuses - Toro Workman HDX Service Manual

Fuses

The fuse blocks are located below the center of the dash
panel.
Identification and Function (Fig. 9)
Top Row LH: Protects ignition power supply.
Top Row RH: Protects power supply for light system
(headlights, running lights and brake lights).
Second Row LH: Protects main power supply.
Second Row RH: Protects power supply for hazard
lights (if equipped).
Third Row LH: Protects power supply for engine fuel sys-
tem.
Third Row RH: Optional kit.
Fourth Row LH: Protects power supply for powerpoint
and horn (if equipped).
Fourth Row RH: Protects power supply for 4WD differ-
ential (vehicles with 4WD).
On Workman HDX and HDX--D vehicles, an additional
30 amp fuse is located in a fuse holder near the cooling
fan. This fuse protects the power supply for the radiator
fan.
Fuse Testing
1. Make sure that ignition switch is OFF and key is re-
moved from switch.
2. Remove fuse from fuse block for testing.
3. Fuse should have continuity across the terminals.
Electrical System
TOP ROW
SECOND
THIRD
FOURTH
Page 8 - - 10
LEFT RIGHT
10A 15A
10A 10A
10A
15A 10A
Figure 9
Workman HD Series
10A 15A
10A 10A
10A
4WD
15A 10A