Specifications; Specifications - Toro Workman HDX Service Manual

Specifications

Item
Hydraulic Pump (Workman HDX and HDX--D)
Displacement (per revolution)
Hydraulic Pump (Workman HD)
Displacement (per revolution)
System Relief Pressure
Steering Control Valve
Lift Control Valve
Hydraulic Oil
Reservoir (Transaxle) System Capacity
Hydraulic Filter
High Flow Hydraulics Kit Pump (If Equipped)
Front section displacement (per revolution)
Rear section displacement (per revolution)
High Flow Hydraulics Kit System Relief Pressure
High Flow Hydraulics Kit Hydraulic Oil
High Flow Hydraulics Kit Reservoir Capacity
High Flow Hydraulics Kit Hydraulic Filter
NOTE: Vehicles that are equipped with the High Flow
Hydraulics Kit have two (2) independent hydraulic sys-
tems. Each of these hydraulic systems include a hydrau-
lic gear pump, reservoir, oil filter and controls.
Maintenance, troubleshooting and repair of each hy-
draulic system need to be performed independently.
Workman HD Series
Casappa positive displacement gear type pump
Casappa positive displacement gear type pump
Automotive, 10 micron spin--on cartridge type
Casappa positive displacement gear type pump, 2 section
Automotive, 10 micron spin--on cartridge type
Page 9 - - 3
Description
3
0.325 in (5.3 cc)
3
0.378 in (6.2 cc)
1800 PSI (124 Bar)
Eaton Steering Unit, Series OSPM
Three position control valve
Spring return to neutral
Ball checks to maintain load
Dexron III ATF
8 U.S. quart (7.5 Liter)
25 PSI by--pass valve
100 mesh strainer in transaxle
3
0.325 in (5.3 cc)
3
0.519 in (8.5 cc)
2000 PSI (137 Bar)
Multigrade Hydraulic Fluid -- ISO VG 46
4.5 U.S. gallon (17 Liter)
25 PSI by--pass valve
100 mesh strainer in reservoir
Hydraulic System