Polaris 2009 Sportsman XP 850 Service Manual page 231

5. Install the brake caliper and torque the new mounting bolts
to specification.
CAUTION
New bolts have a pre-applied locking agent
which is destroyed upon removal. Always use
new brake caliper mounting bolts
upon assembly.
Rear Caliper Mounting Bolts:
37 ft. lbs. (50 Nm)
6. Torque wheel hub nut to specification and install a new
cotter pin. Tighten nut slightly if necessary to align cotter
pin holes.
80 ft. lbs.
(108 Nm)
Cone
Washers
Wheel Hub Castle Nut:
80 ft. lbs. (108 Nm)
37 ft. lbs.
(50 Nm)
= T
NEW
Cotter Pin
= T
7. Install the rear wheel and (4) wheel nuts. Torque wheel nuts
to specification.
Wheel Nuts:
Steel Wheels: 45 ft. lbs. (61 Nm)
Aluminum Wheels: 75 ft. lbs. (102 Nm)
8. Rotate wheel and check for smooth operation. Bend both
ends of cotter pin around end of spindle in different
directions.
FINAL DRIVE
= T
8.29
8