Polaris 2009 Sportsman XP 850 Service Manual page 159

4. Thread the (2) bolts into the transmission case pin holes to
hold the coupler.
Thread bolts
in pin holes.
5. Remove the retaining nut and transmission coupler.
6. Place the transmission in neutral by moving the bellcrank.
7. Lay the transmission down with the cover facing up and
remove the bolts retaining the transmission cover.
8. Carefully lift up on the cover. Use a soft-faced hammer to
tap on the input shaft and rear output shaft to ease cover
removal.
Coupler
Output Shaft
Primary Shaft
9. Lift up on the rear output shaft assembly and remove the
front output shaft assembly.
10. Remove the (2) screws retaining the oil deflector plate.
TRANSMISSION
Front
Output Shaft Output Shaft
Input Shaft
6
Rear
6.5