Setting User Login Administration; Authentication Security - Kyocera ECOSYS M6035cidn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Setting User Login Administration

This registers, alters and deletes users and configures the settings for User Login Administration.

Authentication Security

If user authentication is enabled, configure the user authentication settings.
User Account Lockout Setting
You can prohibit the use of a user account if an incorrect password is entered repeatedly to login with that account.
1
2
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name:
Login Password:
2
[User Login Setting] > [User Account Lockout Settings]
Configure the settings.
The following settings can be selected.
Item
Lockout
Lockout Policy
Locked out Users List
3500
3500
Select whether or not account lockout policy is enabled.
Value: Off, On
Specify the conditions and the extent to which the account lockout is
applied.
Value
Number of Retries until Locked:
Specify how many login retries are allowed until
the account is locked out.
(1 to 10 times)
Lockout Duration: Specify how long the account is to be locked out
until it is unlocked.
(1 to 60 minutes)
Lockout Target Specify the extent to which the account lockout
is applied. You can select from [All] or [Remote
Login Only]. Remote Login Only locks out all
operations from outside the operation panel.
Displays a list of locked out users. You can unlock a user by selecting the
user in the list, and selecting [Unlock].
NOTE
This function is displayed when account lockout policy is enabled.
9-4
Descriptions