Kyocera ECOSYS M6035cidn Operation Manual page 367

Troubleshooting > Troubleshooting
Message
SSD error.
System error.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-39)
*2 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-39)
T
Message
The cover is open.
The manufacturer
assumes no
responsibility for
damage caused by a
non-genuine toner.
The slit glass requires
cleaning.
This memory is not
formatted.
Checkpoints
—
—
Checkpoints
Is the top cover of the document
processor open?
Is there any cover which is open?
Is the installed toner container our
own brand?
—
Is the removable memory formatted
by this machine?
10-24
Corrective Actions
An error has occurred on SSD. Job
is canceled. Select [End].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, divide the file into
smaller files. If the error occurs after
the file is divided, the specified file
may be damaged. Delete the file.
04: Insufficient space on SSD to
complete this operation. Move data
or delete unneeded data.
System error has occurred. Follow
the instructions on the screen.
Corrective Actions
Close the document processor
cover.
Close the cover indicated on the
screen.
We will not be liable for any damage
caused by the use of third party
supplies in this machine. If you want
to continue, select [Next].
Clean the slit glass using the
cleaning cloth supplied with the
document processor.
Perform [Format] on this machine.
Reference
Page
—
—
Reference
Page
―
―
page 10-2
page 7-11