Kyocera ECOSYS M6035cidn Operation Manual page 364

Troubleshooting > Troubleshooting
Message
Memory is full.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-39)
P
Message
Paper jam.
Preparing to print.
Print overrun.
Checkpoints
*1
—
—
Checkpoints
―
―
—
Corrective Actions
The process cannot be performed
due to insufficient memory. The job
is canceled. Select [End].
The machine may reproduce the
same originals by arranging the
following setting:
• Decrease [Image Quality] of
[File Format].
Unable to continue the job as the
memory is used up. Select
[Continue] to print the scanned
pages. The print job cannot be
processed completely. Select
[Cancel] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
• Select [On] of RAM Disk Setting
in System Menu, and then
decrease the RAM disk size.
• Select [Printer Priority] of
Optional Memory in System Menu.
NOTE
Before changing the RAM Disk
Setting or Optional Memory setting,
contact your administrator.
Corrective Actions
If a paper jam occurs, the machine
will stop and the location of the jam
will be indicated on the screen.
Leave the machine on and follow
the instruction to remove the
jammed paper.
The machine is under the
adjustment to maintain its quality.
Please wait.
Warning. Low printer memory. The
job was paused. Re-starting the job.
Select [Continue].
10-21
Reference
Page
—
—
Reference
Page
page 10-35
—
—