Kyocera ECOSYS M6035cidn Operation Manual page 361

Troubleshooting > Troubleshooting
C
Message
Calibrating...
Cannot connect to
Authentication Server.
Cannot duplex print on
the following paper.
Cannot print the
specified number of
*1
copies.
Cannot process this
*1
job.
Cassette is not installed.
Check the toner
container.
Check waste toner box.
Cleaning the laser
scanner...
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-39)
Checkpoints
—
—
*1
—
—
—
Did you select a paper size/type
that cannot be duplex printed?
*1
—
―
―
—
—
Is the waste toner box full?
—
Corrective Actions
The machine is under the
adjustment to maintain its quality.
Please wait.
Set machine time to match the
server's time.
Check the domain name.
Check the host name.
Check the connection status with
the server.
Select [Paper Selection] to select
the available paper. Select
[Continue] to print without using
Duplex function.
Only one copy is available. Select
[Continue] to continue printing.
Select [Cancel] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
• Uncheck [RAM Disk] in the
[Device Settings] tab of the
printer's properties.
NOTE
If you unchecked the [RAM Disk],
check the [RAM Disk] again after
the printing is completed. If not,
print speed may be reduced.
This job is canceled because it is
restricted by User Authorization or
Job Accounting. Select [End].
Cannot feed paper. Set the cassette
indicated on the screen.
The toner container is not installed
correctly. Set it correctly.
The waste toner box is not installed
correctly. Set it correctly.
Replace the waste toner box.
The machine is under the
adjustment to maintain its quality.
Please wait.
10-18
Reference
Page
page 10-34
page 2-24
page 9-2
page 9-2
—
page 6-23
—
―
―
page 10-4
page 10-8
―