Kyocera ECOSYS M6035cidn Operation Manual page 286

Setup and Registration (System Menu) > System Menu
Item
ThinPrint
ThinPrintOver
SSL
*1 The setting will be changed after restarting the device or the network for the machine.
*2 Set "SSL" to [On] in "Secure Protocol".
Secure Protocol (page 8-30)
WSD Scan
Item
WSD Scan
*1 The setting will be changed after restarting the device or the network for the machine.
WSD Print
Item
WSD Print
*1 The setting will be changed after restarting the device or the network for the machine.
Enhanced WSD
Item
Enhanced WSD
*1 The setting will be changed after restarting the device or the network for the machine.
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Select whether to use ThinPrint. When selecting [On], set the ThinPrint default Port Number.
*1 *2
Use the default port 4000.
Value: Off, On (Port Number: 1 to 32767)
NOTE
This function is displayed only when the optional ThinPrint Option is activated.
To use Thin Print over SSL, select [Thin Print over SSL] and select [On].
Value: Off, On
NOTE
When selecting [On], the certificates must be installed.
Command Center RX User Guide
Select whether or not to use WSD Scan.
Value: Off, On
Set whether to use our proprietary web services. WIA driver, TWAIN driver and Network FAX
driver use this Enhanced WSD web service.
Value: Off, On
Set whether to use our proprietary web services.
Value: Off, On
NOTE
Selecting [Off] will disable the functionality of WIA, TWAIN, and Network FAX driver.
8-29
Description
Description
*1
Description
*1
Description
*1