Resetting The Parental Lock Code Number (Sirius Lock); Switching The Video Signal Type (Tv Format); Removing The Limitation On Hdmi Video Output (Monitor Check); Backing Up/Recovering The Settings (Recov./Backup) - Yamaha RX-A2010 Owner's Manual

5
Press ENTER to confirm the setting.
Once the remote control ID is registered successfully, "OK" appears in the display window.
If "ERROR" appears, registration failed. Repeat from step 3.
6
To exit from the setup menu, press SETUP.
• The registered remote control codes (p.128) are not cleared even if you change the remote control ID.

Resetting the Parental Lock code number (SIRIUS LOCK)

SP IMP. - SIRIUS LOCK
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
CANCEL
2 3 4
IN OUT 1 OUT 2
ENHANCER SLEEP
HD 3
Reset the Parental Lock code number for SIRIUS Satellite Radio.
Choices
RESET Resets the Parental Lock code number.
CANCEL Does not perform a reset.

Switching the video signal type (TV FORMAT)

SP IMP. -
DOCK TV FORMAT
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
2 3 4 NTSC
IN OUT 1 OUT 2
ENHANCER SLEEP
3
HD
Switch the video signal type of this unit so that it matches to the format of your TV.
Settings
NTSC (default), PAL
Removing the limitation on HDMI video output
(MONITOR CHECK)
DOCK SP IMP. - MONITOR CHECK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
YES
IN OUT 1 OUT 2 2 3 4
ENHANCER SLEEP
3
HD
This unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jacks.
If you want to select a resolution in "Resolution" (p.114) regardless of the detection
results or if this unit does not detect it correctly, disable the monitor check function.
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
Settings
Enables the monitor check function. (Outputs video signals with a
YES (default)
resolution supported by the TV only.)
Disables the monitor check function. (Outputs video signals with a
SKIP
specified resolution regardless of compatibility with the TV.)
• In case this unit becomes inoperable because videos from this unit cannot be displayed on the TV after
"MONITOR CHECK" is set to "SKIP", reset the setting to "YES".

Backing up/recovering the settings (RECOV./BACKUP)

DOCK SP IMP. - RECOV./BACKUP
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
BACKUP
IN OUT 1 OUT 2 2 3 4
ENHANCER SLEEP
HD 3
Creates backup of the settings of this unit, or recovers the settings from the backup.
■
Backup/recovery procedure
1
Press STRAIGHT repeatedly to select "BACKUP" or "RECOVERY" and press INFO to
start the process.
Choices
BACKUP Creates backup of the settings of this unit in the internal memory.
Recovers the settings of this unit from the backup (available only when
RECOVERY
backup has been created).
Note
• Do not turn off this unit during the recovery process. Otherwise, the settings may not be restored
correctly.
• The backup does not contain user information (user account, password, etc.) or unit-specific
information (MAC address, IP address, etc).
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
126
En