Yamaha RX-A2010 Owner's Manual page 111

❑ Subwoofer 1, Subwoofer 2
Selects whether or not subwoofer is connected to the SUBWOOFER 1 or
SUBWOOFER 2 jack and its phase.
Settings
Select this when a subwoofer is connected to the SUBWOOFER 1 or
Normal SUBWOOFER 2 jack (not to reverse the phase). The subwoofer will
(default) produce LFE (low-frequency effect) channel audio and low-frequency
components from other channels.
Use
Select this when a subwoofer is connected to the SUBWOOFER 1 or
SUBWOOFER 2 jack (reverse the phase). The subwoofer will produce
Reverse
LFE (low-frequency effect) channel audio and low-frequency
components from other channels.
Select this when no subwoofer is connected to the SUBWOOFER 1 or
SUBWOOFER 2 jack. The front speakers will produce LFE (low-
None frequency effect) channel audio and low-frequency components from
other channels when both "Subwoofer 1" and "Subwoofer 2" are set
to "None".
• When the bass sound is lacking or unclear, switch the subwoofer phase.
❑ SWFR Layout
Selects a subwoofer layout when 2 subwoofers are used.
Settings
Select this when 2 subwoofers are placed on the left and right sides of
Left + Right
the room.
Select this when 2 subwoofers are placed on the front and rear sides of
Front + Rear
the room.
Monaural x2
Select this when 2 subwoofers are placed freely.
(default)
• This setting is not available when "Subwoofer 1" or "Subwoofer 2" is set to "None".
❑ Extra Bass
Sets the speakers to produce the front channel low-frequency components.
Settings
Depending on the size of the front speakers, either the subwoofer or
Off (default)
front speakers produce the front channel low-frequency components.
Both the front speakers and subwoofer produce the front channel low-
On
frequency components.
• This setting is not available when both "Subwoofer 1" and "Subwoofer 2" are set to "None", or "Front" is set
to "Small".
■
Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from "Meter" or "Feet".
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front
Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2
Setting range
0.30m ~ 24.00m (1.0ft ~ 80.0ft) *0.05m (0.2ft) steps
Default
3.00m (10.0ft)
■
Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front
Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2
Setting range
-10.0dB ~ +10.0dB (0.5dB steps)
Default
0.0dB
Adjusting while viewing the front display
a Press LEVEL.
b Use the cursor keys ( / ) to select a speaker.
c Use the cursor keys ( / ) to adjust the volume of the selected speaker.
111
En