Avoiding Crossing Remote Control Signals When Using Multiple Yamaha Receivers; Resetting The Sirius Satellite Radio™ Parental Lock Code; Changing Tv Format - Yamaha RX-A1000 Owner's Manual

MAIN ZONE 2
CODE SET o
Avoiding crossing remote control
SOURCE RECEIVER p
signals when using multiple
AV
1 2 3 4
Yamaha receivers
5 6 7 V-AUX
AUDIO
1 2 3 4
USB NET MULTI DOCK
HDMI OUT
TUNER SIRIUS PHONO
CATEGORY
FM AM
PRESET TUN./CH
The remote control of the unit can only receive signals
INFO MEMORY
from a receiver which has an identical ID (remote
ENHANCER SUR. DECODE
MOVIE MUSIC
control ID). When using multiple Yamaha AV receivers,
SLEEP PARTY STRAIGHT PURE DIRECT
you can set each remote control with a unique remote
SCENE
control ID for its corresponding receiver.
1 1 2 2 3 3 4 4
On the contrary, if you are setting the same remote
BD/DVD BD/DVD TV TV CD CD RADIO RADIO
control ID for all receivers, you can use one remote
ON SCREEN OPTION
control to operate 2 receivers.
ENTER VOLUME
RETURN DISPLAY
ID1 (Default)
TOP
POP-UP
MUTE
MENU MENU
REC
ID2
1 2 3 4
m
5 6 7 8
ID1 is set for both remote control and receiver by
9 0 10 ENT
default. To avoid crossing remote control, change the
remote control ID for both remote control and
INPUT
receiver.
MUTE
m
Numeric keys
o
CODE SET
p
SOURCE/RECEIVER
R E M O T E C O N A M P
I D 1
Receives the remote control signals set in
ID1.
Receives the remote control signals set in
ID2.
Extended functionality that can be configured as needed (Advanced Setup menu)
■ To change the remote control ID
Perform each of the following steps within
1 minute. Settings will be automatically stopped if
more than 1 minute passes since the last operation.
To reset, repeat from step 1.
oCODE SET
Press using a pointed
1
object such as the tip of a ballpoint pen.
Press pSOURCE/RECEIVER.
2
Enter the desired remote control ID code.
3
To switch to ID1:
m
Enter "5019" using Numeric keys.
To switch to ID2:
m
Enter "5020" using Numeric keys.
Once the remote control code is registered
p
SOURCE/RECEIVER
successfully will blink
twice.
Registration successful: blinks twice
Registration failed: blinks 6 times
MAIN ZONE 2
CODE SET
SOURCE RECEIVER
AV
1 2 3 4
• If setup fails, repeat from step 1.
• Returns to ID1 after the remote control code is
initialized (☞p. 127).
SETUP
Resetting the SIRIUS Satellite
Radio™ parental lock code
S I R I U S P I N
C A N C E L
Reset the SIRIUS Satellite Radio parental lock code to
the factory default setting. If you forget the code, it can
be reset.
RESET
Resets the code to the factory default
setting.
CANCEL (Default)
Cancels resetting of the parental lock
code.

Changing TV format

T V F O R M A T
N T S C
Change the color encoding format of OSD to PAL or
NTSC (default), to match the format used by the TV
connected via the HDMI OUT 1-2 or VIDEO
(MONITOR OUT) jack.
En
129