Connecting A Device Compatible With Scene Link Playback (Remote Connection); Connecting A Device Compatible With The Trigger Function - Yamaha RX-A2010 Owner's Manual

1 2 3 4 5 6
Other connections
Connecting a device compatible
with SCENE link playback (remote connection)
If you have a Yamaha product that has the capability of the SCENE control signal
transmission, you can control the Yamaha product in conjunction with a scene selection
(p.52) by connecting it to one of the REMOTE (OUT) jacks with a monaural mini-jack
cable.
This unit (rear)
REMOTE (OUT) jacks
HDMI
AV 3 AV 4 AV 5 AV 6 AV 7
REMOTE
1
TRIGGER
C P R OUT
IN OUT
1
REMOTE
MONITOR OUT/ZONE OUT
1 2
Y P P
B R IN OUT IN OUT
2
D +12V 0.1A MAX.
ZONE OUT PRE OUT (SINGLE) (FRONT)
1
2
(REAR)
R ZONE 2 ZONE 3 FRONT SURROUND SUR. BACK SUBWOOFER CENTER
SPEAKERS
ZONE 2
K ZONE 2/ZONE 3/R.PRESENCE CENTER FRONT
L R L BI–AMP
R L
EXTRA SP2
R
NGLE
• If you connect a Yamaha product compatible with SCENE link playback to one of the REMOTE (OUT)
jacks, you can start playback on the Yamaha product in conjunction with a scene selection (p.52). To enable
the SCENE link playback, specify the device type in "Device Control" (p.101) in the "Scene" menu.
• You also connect an infrared signal receiver/emitter to operate devices in the main zone from Zone2 (p.88).
7 8
2
IN OUT
Remote input
REMOTE
IN
Yamaha product
(DVD player, etc.)
Connecting a device compatible
with the trigger function
The trigger function can control an external device in conjunction with operations
(power-on/off, input selection, etc.) on this unit. If you have a Yamaha subwoofer that
supports a system connection or a device with a trigger input jack, you can use the
trigger function by connecting the external device to one of the TRIGGER OUT jacks.
TRIGGER OUT
1~2 jacks
This unit (rear)
TRIGGER
OUT
1
HDMI RS-232C
AV 3 AV 4 AV 5 AV 6 AV 7
TRIGGER
C P R OUT
2
1
REMOTE
MONITOR OUT/ZONE OUT
1 2
Y P B P R
IN OUT IN OUT
+12V 0.1A MAX.
2
D
+12V 0.1A MAX.
ZONE OUT PRE OUT
(SINGLE) (FRONT)
1
2
(REAR)
R ZONE 2 ZONE 3 FRONT SURROUND SUR. BACK CENTER
SUBWOOFER
SPEAKERS
ZONE 2/ZONE 3/R.PRESENCE ZONE 2/ZONE 3/F.PRESENCE/ AC
K CENTER FRONT
L R L BI–AMP
R L
EXTRA SP2 R EXTRA SP1 L
NGLE
• You can configure the trigger function settings in "Trigger Output1" and "Trigger Output2" (p.121) in the
"Setup" menu.
System connection
input
Yamaha subwoofer that
supports a system connection
42
En