Yamaha RX-A2010 Owner's Manual page 133

SOURCE
SOURCE RECEIVER
RECEIVER RECEIVER
SOURCE/RECEIVER
AV
1 2 3 4
5 6 7 V-AUX
AUDIO
Input selection keys
1 2 3 4
PHONO MULTI USB NET
DOCK TUNER SIRIUS [ A ]
SCENE
1 2 3 4
PROGRAM MUTE VOLUME
TOP MENU POP-UP/MENU
ON SCREEN OPTION
Cursor keys
ENTER
ENTER ENTER
RETURN DISPLAY
MODE
HOLD TAG PRG SELECT
LIVE
CLASSICAL ENTERTAIN
CLUB
PRESET
MOVIE STEREO STRAIGHT
TV
PURE
INPUT
DIRECT
TV VOL TV CH
TV
MUTE
SUR.
ENHANCER PARTY HDMI OUT
DECODE
CATEGOR CATEGORY A A Y
INFO MEMORY FM AM
1 2 3
TUN./ CH TUN./ CH
4 5 6
7 8 9 SLEEP
10 0 ENT LEVEL
SETUP
ZONE SETUP
■
Programming macro operations
You can program up to 10 remote control commands for each
macro operation key. If you press the corresponding macro
operation key, the multiple operations will be carried out
sequentially according to the programmed remote control
commands.
• Before programming macro operations, you need to set the remote control codes
(p.128) or assign a function to each key using the learning function (p.130).
• We do not recommend including continuous operations (such as volume
adjustment) in macro operations.
1
Press SETUP.
Perform each of the following steps within 30 seconds.
Otherwise, the setting will be canceled. In this case, repeat
from step 1.
2
Use the cursor keys ( / ) to select "MACRO" and
press ENTER.
MACRO
3
Use the cursor keys ( / ) to select "EDIT" and
press ENTER.
EDIT
4
Press the macro operation key (RECEIVER
input selection key) to which macro operations are
assigned and press ENTER.
"MACRO 1" appears in the display window.
MACRO 1
5
Press the keys for functions (up to 10) you want to
include in the macro operations in sequence.
To switch the devices (this unit or external device) to
control, press SOURCE/RECEIVER.
(Example)
Programming for aturning on this unit, bselecting "AV1"
as the input source, cturning on the DVD player assigned
to "AV1" and dturning on the TV
a (MACRO 1) Press RECEIVER
b (MACRO 2) Press AV1.
c (MACRO 3) Press SOURCE/RECEIVER repeatedly to select
"AV1" and press SOURCE
d (MACRO 4) Press SOURCE/RECEIVER repeatedly to select
"TV" and press TV
6
To confirm the setting, hold down ENTER until "OK"
appears on the window display.
If you have programmed 10 functions, "FULL" appears and
the setting is confirmed automatically.
7
To exit from the setup menu, press SETUP.
or
.
.
.
133
En