Yamaha RX-A2010 Owner's Manual page 129

SOURCE SOURCE RECEIVER RECEIVER
AV
1 2 3 4
5 6 7 V-AUX
AUDIO
Input selection keys
1 2 3 4
PHONO MULTI USB NET
DOCK TUNER SIRIUS [ A ]
SCENE
1 2 3 4
PROGRAM MUTE VOLUME
TOP MENU POP-UP/MENU
ON SCREEN OPTION
Cursor keys
ENTER
ENTER ENTER
RETURN DISPLAY
MODE
HOLD TAG PRG SELECT
LIVE
CLASSICAL ENTERTAIN
CLUB
PRESET
MOVIE STEREO STRAIGHT
TV
PURE
INPUT
DIRECT
TV VOL TV CH
TV operation keys
MUTE
SUR.
ENHANCER PARTY HDMI OUT
DECODE
CATEGOR CATEGORY A A Y
INFO MEMORY FM AM
1 2 3
TUN./ CH TUN./ CH
4 5 6
Numeric keys
7 8 9 SLEEP
10 0 ENT LEVEL
SETUP
ZONE SETUP
5
Use the numeric keys or cursor keys to enter the
4-digit remote control and press ENTER.
Once the remote control code is set successfully, "OK"
appears in the display window.
If "ERROR" appears, registration failed. Repeat from
step 3.
6
To exit from the setup menu, press SETUP.
❑ TV operations
Once you have set the remote control code for your TV, you can
control it using the TV operation keys regardless of an input source
selected on this unit.
INPUT Switches the video inputs of the TV.
MUTE Mutes the audio output of the TV.
TV operation keys TV VOL Adjust the volume of the TV.
TV CH Switch the channels of the TV.
TV Turns on/off the TV.
■
Setting the remote control codes for
playback devices
By setting the remote control codes for your playback devices, you
can operate those devices with the remote control of this unit. Since
the codes are assigned to each input source key, you can select
the input source and device to control with the remote control
concurrently.
• At the factory, Yamaha CD player code (5095) is set for AUDIO2 and Yamaha AV
receiver code (5098) is set for the other input selection keys.
• If you assign the remote control code for an external device to the [A] key, you can
operate the device with the remote control without switching the input source after
pressing the [A] key.
• When HDMI control of both this unit and playback device such as a BD/DVD
player are enabled, you may be able to control the device with the remote control
without registering the remote control code.
1
Use "Remote Control Code Search" in the CD-ROM
to find a remote control code for your playback
device.
• If multiple remote control codes exist, first set the first code in the list, if it
does not work then try the other codes.
2
Press SETUP.
Perform each of the following steps within 30 seconds.
Otherwise, the setting will be canceled. In this case, repeat
from step 2.
3
Use the cursor keys ( / ) to select "PRESET" and
press ENTER.
PRESET
4
Press a corresponding input selection key and
press ENTER.
For example, press AV1 to set the remote control code for
the playback device connected to the AV1 jack.
Code currently registered
5098
5
Use the numeric keys or cursor keys to enter the
4-digit remote control and press ENTER.
Once the remote control code is set successfully, "OK"
appears in the display window.
If "ERROR" appears, registration failed. Repeat from
step 3.
6
To set another remote control code, repeat steps 4
and 5.
129
En