Turning On/Off The Remote Control Sensor (Remote Sensor); Selecting The Remote Control Id (Remote Con Amp); Resetting The Parental Lock Code Number (Sirius Lock); Switching The Video Signal Type (Tv Format) - Yamaha RX-A1010 Owner's Manual

Turning on/off the remote control sensor
(REMOTE SENSOR)
SP IMP. - REMOTE SENSOR
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
2 3 4 ON
IN OUT 1 OUT 2
ENHANCER SLEEP
3
HD
Turn on/off the remote control sensor on the main unit. While the remote control sensor
is turned off, you cannot control this unit from the remote control.
Settings
ON (default) Turns on the remote control sensor.
OFF Turns off the remote control sensor.

Selecting the remote control ID (REMOTE CON AMP)

SP IMP. - REMOTE CON AMP
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
ID1
2 3 4
IN OUT 1 OUT 2
ENHANCER SLEEP
3
HD
Select the remote control ID of the main unit so that it matches to the ID of the remote
control (default: ID1). When using multiple Yamaha AV receivers, you can set each
remote control with a unique remote control ID for its corresponding receiver.
Settings
ID1 (default), ID2
■
Changing the remote control ID of the remote control
Perform each of the following steps within 1 minute. Otherwise, the setting will be
automatically canceled.
1
Press CODE SET on the remote control using a pointed object such as the tip of a
ballpoint pen.
2
Press SOURCE/RECEIVER.
3
Use the numeric keys to enter "5019" (ID1) or "5020" (ID2).
Once the remote control ID is registered successfully, SOURCE/RECEIVER blinks twice.
If it blinks 6 times, registration failed. Repeat from step 1.
• The registered remote control codes (p.121) are not cleared even if you change the remote control ID.
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR

Resetting the Parental Lock code number (SIRIUS LOCK)

SP IMP. - SIRIUS LOCK
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
2 3 4 CANCEL
IN OUT 1 OUT 2
ENHANCER SLEEP
3
HD
Reset the Parental Lock code number for SIRIUS Satellite Radio.
Choices
RESET Resets the Parental Lock code number.
CANCEL Does not perform a reset.

Switching the video signal type (TV FORMAT)

DOCK SP IMP. - TV FORMAT
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
NTSC
IN OUT 1 OUT 2 2 3 4
ENHANCER SLEEP
HD 3
Switch the video signal type of this unit so that it matches to the format of your TV.
Settings
NTSC (default), PAL
Removing the limitation on HDMI video output
(MONITOR CHECK)
SP IMP. - MONITOR CHECK
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
YES
IN OUT 1 OUT 2 2 3 4
ENHANCER SLEEP
HD 3
This unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jacks.
If you want to select a resolution in "Resolution" (p.109) regardless of the detection
results or if this unit does not detect it correctly, disable the monitor check function.
Settings
Enables the monitor check function. (Outputs video signals with a
YES (default)
resolution supported by the TV only.)
Disables the monitor check function. (Outputs video signals with a
SKIP
specified resolution regardless of compatibility with the TV.)
• In case this unit becomes inoperable because videos from this unit cannot be displayed on the TV after
"MONITOR CHECK" is set to "SKIP", reset the setting to "YES".
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
119
En