Avoiding Crossing Remote Control Signals When Using Multiple Yamaha Receivers; Resetting The Sirius Satellite Radio™ Parental Lock Code - Yamaha RX-V667 Owner's Manual

MAIN ZONE 2
CODE SET o
Avoiding crossing remote control
RECEIVER
SOURCE q
signals when using multiple
HDMI
1 2 3 4
AUDIO
Yamaha receivers
5 V-AUX 1 2
AV
1 2 3 4
5 6 MULTI DOCK
TUNER SIRIUS [ A ]
REMOTE ID -ID1
CATEGORY
FM AM
PRESET TUN./CH
INFO MEMORY
The remote control of the unit can only receive signals
ENHANCER SUR. DECODE
from a receiver which has an identical ID (remote
MOVIE MUSIC
SLEEP STRAIGHT PURE DIRECT
control ID). When using multiple Yamaha AV receivers,
SCENE
you can set each remote control with a unique remote
BD
TV CD RADIO
DVD
control ID for its corresponding receiver.
OPTION
ON SCREEN
On the contrary, if you are setting the same remote
control ID for all receivers, you can use one remote
ENTER VOLUME
control to operate 2 receivers.
RETURN
DISPLAY
TOP
POP-UP
MUTE
ID1 (Default)
MENU MENU
REC
ID2
1 2 3 4
m
5 6 7 8
9 0 10 ENT
ID1 is set for both remote control and receiver by
INPUT
default. To avoid crossing remote control, change the
MUTE
remote control ID for both remote control and
receiver.
m
Numeric keys
o
CODE SET
q
SOURCE/RECEIVER
■ To change the remote control ID
1
2
3
Receives the remote control signals set in
ID1.
Receives the remote control signals set in
ID2.
Extended functionality that can be configured as needed (Advanced Setup menu)
Perform each of the following steps within
1 minute. Settings will be automatically stopped if
more than 1 minute passes since the last operation.
To reset, repeat from step 1.
oCODE SET
Press using a pointed
object such as the tip of a ballpoint pen.
Press qSOURCE/RECEIVER.
Enter the desired remote control ID code.
To switch to ID1:
m
Enter "5019" using Numeric keys.
To switch to ID2:
m
Enter "5020" using Numeric keys.
Once the remote control code is registered successfully
q
SOURCE/RECEIVER will blink twice.
Registration successful: blinks twice
Registration failed: blinks 6 times
ZONE 2
CODE SET
SOURCE RECEIVER
HDMI
1 2 3 4
• If setup fails, repeat from step 1.
• Returns to ID1 after the remote control code is
initialized (☞p. 98).
SETUP
Resetting the SIRIUS Satellite
Radio™ parental lock code
SR PIN -CANCEL
Reset the SIRIUS Satellite Radio parental lock code to
the factory default setting.
RESET Resets the code to the factory default
setting.
CANCEL (Default) Cancels resetting of the parental lock
code.
En
100