Yamaha RX-A2010 Owner's Manual page 31

1 2 3 4 5 6 7 8
TV connection
■
Connection method 2 (HDMI Control-compatible TV)
Connect the TV to this unit with an HDMI cable and an audio cable (digital optical or
stereo pin cable).
• The following explanation is based on the assumption that you have not changed the "HDMI" parameters
(p.116) in the "Setup" menu.
• HDMI Control is available only on the HDMI OUT 1 jack.
HDMI OUT 1 jack
HDMI OUT
1 2
ARC
This unit (rear)
HDMI
DOCK NETWORK
HDMI OUT
AV 1
1 2
(1
ARC
AV 1 AV 2 AV 3 AV 4
(1 BD/DVD) AV OUT MONITOR OUT/ Y P
B
ZONE OUT
AV 1
A
PHONO
GND
AV 2
B
AUDIO 1 AUDIO 2 AUDIO 3 AUDIO 4
L (2 TV) (3 CD)
AUDIO 1
R (2 TV)
FRONT
SIRIUS 1 COAXIAL 2 COAXIAL 3 OPTICAL 4 OPTICAL 5 OPTICAL 6 COAXIAL
L
SURROUND
R L
R
ANTENNA
HD Radio (4 RADIO)
FM GND AM
75Ω
5
OPTICAL
O
AUDIO1 (OPTICAL or AUDIO)
jacks
• If you make an HDMI connection between your TV and this unit, any videos input to this unit can be output
to the TV no matter how you connect video devices to this unit. For details, see "Video signal flow" (p.149).
• You can connect another TV or a projector by using the HDMI OUT 2 jack (p.34).
HDMI input
HDMI
HDMI
AUDIO
L
L
R
R
TV
OPTICAL
O
Audio output
(digital optical or analog stereo)
❑ Necessary settings
To use HDMI Control, you need to configure the following settings.
For details on settings and operations of your TV, refer to the instruction manual of the
TV.
1
After connecting external devices (TV, playback devices, etc.) and
power cable of this unit, turn on this unit, TV and playback devices.
2
Configure the settings of this unit.
a Switch the TV input to display the video from this unit.
b Press ON SCREEN.
ON SCREEN OPTION
ON SCREEN
Cursor keys
ENTER
ENTER
RETURN DISPLAY
c Use the cursor keys to select "Setup" and press ENTER.
d Use the cursor keys ( / ) to select "HDMI".
e Use the cursor keys ( / ) to select "HDMI Control" and press ENTER.
f Use the cursor keys to select "On".
g Press ON SCREEN.
31
En