Table of Contents
Advertisement
PA-32R-301, SARATOGA IT HP
SECTION 4 - NORMAL PROCEDURES
•
BEFORE TAKEOFF:
• To transmit Mode C (Altitude Reporting) code in flight:
• Mode Selection Key - ALT
• Code Selector Keys - SELECT assigned code.
To transmit Mode A (Aircraft Identification) code in flight:
• Mode Selector Key - ON
• Code Selector Keys - SELECT assigned code.
NOTE
SECTION9
SUPPLEMENT 18
During normal operation with the ON mode selected, the
reply indicator "R" flashes, indicating transponder replies to
interrogations.
NOTE
Mode A reply codes are transmitted in ALT also; however,
Mode C codes only are suppressed when the Function
Selector ON key is selected.
1. DETAILED TRANSPONDER OPERATING PROCEDURES
Normal transponder operating procedures are described in the GARMIN
GTX 330 Pilot's Guide,
PIN
190-00207-00, Rev. A, or later appropriate
revtston.
2. DISPLAY OF TRAFFIC INFORMATION SERVICE (TIS) DATA
TIS surveillance data up linked by Air Traffic Control (AT
C)
radar through the
GTX 330 Mode S Transponder will appear on the interfaced display device
(Garmin 400 or 500 series products). For detailed operating instructions and
information regarding the TIS interface, refer to the 400/500 Series Garmin
Display Interfaces (Pilot's Guide Addendum)
PIN
190-00140-13 Rev. A or
later appropriate revision.
ISSUED:
JUNE
30,1997
REVISED:cDECEMBER 10, 2003
REPORT: VB-1669
3 of 4,
9-105
Advertisement
Table of Contents
