Adjust/Maint - Kyocera ECOSYS M6530cdn Operation Manual

Setup and Registration (System Menu) > System Menu
Op Functions
[System Menu/Counter] key > [▲] [▼] key > [System/Network] > [OK] key > [▲] [▼] key > [Op Functions] > [OK] key
Item
Op Functions

Adjust/Maint.

[System Menu/Counter] key > [▲] [▼] key > [Adjust/Maint.] > [OK] key
Adjust printing quality and conduct machine maintenance.
Item
Quiet Mode
Quiet Mode
Each Job
Copy Denst. Adj.
Send/Box Density
Contrast (Copy)
Contrast (Send)
Background Density
Copy (Auto)
Send/Box (Auto)
AutoColorCorrect
Correct. Bk Line
You can use the optional applications installed on this machine.
Optional Applications (page 11-9)
Lower print and scan speed for quiet processing.
Set the Quiet Mode. Select this mode when the running noise is uncomfortable.
Value: Off, On
It is possible to set the use of Quiet Mode for each job, such as copying and sending. Set
whether or not to permit the setting for each job.
Value: Permit, Prohibit
Adjust copy density.
Value: -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
Adjust scan density when sending or storing the data in Document Box.
Value: -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
Increases or decreases the overall contrast of copies.
Value: -3, -2, -1, 0, 1, 2, 3
Increases or decreases the overall contrast when documents are sent or saved in a document
box.
Value: -3, -2, -1, 0, 1, 2, 3
Darkens or lightens overall background density adjustment.
Darkens or lightens overall background density adjustment during copying.
Value: -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
Darkens or lightens overall background density when sending images or storing them in the
Document Box.
Value: -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
This setting allows you to adjust the detection level used by the machine to determine whether
the original is color or black and white during Auto Color Mode. Setting a lower value will result
in more originals being identified as color, while a larger value will tend to increase the number
of originals being identified as black and white.
Value: 1 to 5
Correct fine lines (streaks caused by contamination), which may appear on the image, when
the document processor is used.
Value
Off: No correction performed. Select this when you want to reproduce fine lines in the
original more clearly than with [On (Low)].
On (Low): Correction performed.
On (High): Select this item if a streak remains after using [On (Low)]. The reproduction
of fine lines on the original may become lighter than when using On (Low).
8-34
Description
Description