Connecting Usb Cable; Connecting The Power Cable - Kyocera ECOSYS M6530cdn Operation Manual

Installing and Setting up the Machine > Connecting Cables

Connecting USB Cable

IMPORTANT
If the power is on, turn the power switch off.
Power Off (page 2-10)
1
2

Connecting the Power Cable

1
Connect the cable to the machine.
1
Connect the USB cable to the USB interface connector located on the left side of the body.
2
Connect the other end of the cable to the PC.
Power on the machine.
Connect the cable to the machine.
Connect one end of the supplied power cable to the machine and the other end to a power
outlet.
IMPORTANT
Only use the power cable that comes with the machine.
2-9