Login/Logout; Login - Kyocera ECOSYS M6530cdn Operation Manual

Installing and Setting up the Machine > Login/Logout

Login/Logout

If you are setting a function that requires administrator rights, or if user login administration is enabled, you must enter
your login user name and login password.
NOTE
The factory default login user name and login password are set as shown below.
Login User Name: 3000
Login Password: 3000
You will be unable to login if you forget your login user name or login password. In this event, login with administrator
privileges and change your login user name or login password.

Login

1
2
3
Enter the login user name.
1
If the login screen is displayed during operations, select "Login User Name" and select the
[OK] key.
NOTE
• If [Netwk Authentic.] is selected as the user authentication method, [Menu] is
displayed. Select [Menu] and select [Login Type] and then it is possible to select the
authentication destination as [Local Authentic.] or [Netwk Authentic.].
• Select [Menu] and select [Domain] and then it is possible to select from the domains
registered.
2
Enter the login user name using the numeric keys and select the [OK] key.
NOTE
If Login Operation is [Select Character], then the screen is displayed to enter details by
selecting from the characters on the message display.
Login Operation (page 8-20)
Character Entry Method (page 11-11)
Enter the login password.
1
Select "Login Password" and select the [OK] key.
2
Enter the login password and select the [OK] key.
Character Entry Method (page 11-11)
Select [Login].
2-14