Specifying Destination - Kyocera ECOSYS M6530cdn Operation Manual

Operation on the Machine > Sending

Specifying Destination

Select the destination using either of the following methods:
Choosing from the Address Book (page 5-15)
Choosing from the External Address Book
For details on the External Address Book, refer to the following:
Command Center RX User Guide
Choosing from the One Touch Key (page 5-17)
Entering an E-mail Address (page 5-17)
Specifying a New PC Folder (page 5-18)
Choosing from the FAX
FAX Operation Guide
NOTE
• You can set the machine up so that the address book screen appears when you select the [Send] key.
Default Screen (page 8-21)
• If you are using the products equipped with the fax function, you can specify the fax destination. Enter the other
party number using the numeric keypad.
Choosing from the Address Book
Select a destination registered in the Address Book.
For more information about how to register destinations in the Address Book, refer to the following:
Registering Destinations in the Address Book (page 3-23)
1
2
In the basic screen for sending, select the [Address Book] key.
Select the destinations.
1
[▲] [] key > [Address Book] > [OK] key
NOTE
For details on the External Address Book, refer to the following:
Command Center RX User Guide
2
Select the destination.
NOTE
When checking information of the destination, select [Menu] > [Details] > [OK] key
5-15