Using Various Functions > Functions
Combine
Copy
Combines 2 or 4 original sheets into 1 printed page.
You can select the page layout and the type of boundary lines around the pages.
The following types of the boundary lines are available.
None
Select [2 in 1] or [4 in 1], select [Detail], and configure the function.
Item
Off
2 in 1
2 in 1 Layout
Border Line
Orig. Orientation
4 in 1
4 in 1 Layout
Border Line
Orig. Orientation
Solid Line
Value
―
Disables the function.
―
Select the [OK] key to copy the original with the default setting. For the default
settings, refer to the following:
Function Defaults (page 8-13)
L to R T to B,
Select the page layout of scanned originals, and select the [OK] key.
R to L
None,
Select the page boundary line, and select the [OK] key.
Solid Line,
Dotted Line,
Positioning Mark
Top Edge on Top,
Select the orientation of the original document top edge to scan correct direction.
Top Edge on Left
Choose orientation of the originals, either [Top Edge on Top] or [Top Edge on
Left]. Then select the [OK] key.
―
Select the [OK] key to copy the original with the default setting. For the default
settings, refer to the following:
Function Defaults (page 8-13)
Right then Down,
Select the page layout of scanned originals, and select the [OK] key.
Down then Right,
Left then Down,
Down then Left
None,
Select the page boundary line, and select the [OK] key.
Solid Line,
Dotted Line,
Positioning Mark
Top Edge on Top,
Select the orientation of the original document top edge to scan correct direction.
Top Edge on Left
Choose orientation of the originals, either [Top Edge on Top] or [Top Edge on
Left]. Then select the [OK] key.
Dotted Line
Description
6-20
Positioning Mark