Setting Wia Driver - Kyocera ECOSYS M6530cdn Operation Manual

Installing and Setting up the Machine > Installing Software

Setting WIA Driver

Register this machine to the WIA Driver. Instructions are based on interface elements as they appear in Windows 7.
1
2
Display the screen.
1
Click [Start] button on the Windows and enter [Scanner] in [Program and File Search].
Click [View scanners and cameras] in the search list then the Scanners and Cameras
screen appears.
NOTE
In Windows 8, click [Search] in charms, and enter "View scanners and cameras" in the
search box. Select [View scanners and cameras] in the search list then the Scanners
and Cameras screen appears.
2
Select the same name as this machine from WIA Drivers, and click [Properties].
1
2
Configure WIA Driver.
(Network)
1
2
3
4
(USB)
1
2
3
1 Click the [Settings] tab.
2 Enter the machine IP addresses or host name.
3 When using SSL, select the checkbox beside
SSL.
4 Set units of measurement.
5 Click [OK].
5
1 Click the [Settings] tab.
2 Set the Compression Level.
3 Set units of measurement.
4 Click [OK].
4
2-34