Storm Control Configuration; Qos Statistics - Planet Networking & Communication WGSW-24040 User Manual

4.9.13 Storm Control Configuration

Storm control for the switch is configured on this page.
There is a unicast storm rate control, multicast storm rate control, and a broadcast storm rate control. These only affect flooded
frames, i.e. frames with a (VLAN ID, DMAC) pair not present on the MAC Address table.
The configuration indicates the permitted packet rate for unicast, multicast or broadcast traffic across the switch.
The Storm Control Configuration screen in
The page includes the following fields:
Object

Frame Type

Enable
 Rate
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

4.9.1 QoS Statistics

This page provides statistics for the different queues for all switch ports. The QoS Statistics screen in
Figure 4-9-16 appears.
Figure 4-9-16 Storm Control Configuration page screenshot
Description
The settings in a particular row apply to the frame type listed here: Unicast,
Multicast or Broadcast.
Enable or disable the storm control status for the given frame type.
The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8, 16, 32, 64,
128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K, 1024K,
2048K, 4096K, 8192K, 16384K or 32768K.
User's Manual of WGSW-24040 / WGSW-24040R
201
Figure 4-9-18 appears.