Mldv2 Information - Planet Networking & Communication WGSW-24040 User Manual

 Groups
 Port Members
Buttons
Auto-refresh : Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.
: Updates the table, starting with the first entry in the IGMP Group Table.
: Updates the table, starting with the entry after the last entry currently displayed.

4.8.13 MLDv2 Information

Entries in the MLD SFM Information Table are shown on this page. The MLD SFM (Source-Filtered Multicast) Information Table
also contains the SSM (Source-Specific Multicast) information. This table is sorted first by VLAN ID, then by group, and then by
Port. Different source addresses belong to the same group are treated as single entry. Each page shows up to 99 entries from
the MLD SFM Information table, default being 20, selected through the "entries per page" input field. When first visited, the web
page will show the first 20 entries from the beginning of the MLD SFM Information Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the MLD SFM Information Table.
The MLDv2 Information screen in
The page includes the following fields:
Object
 VLAN ID
 Group
Group address of the group displayed.
Ports under this group.
Figure 4-8-16 appears.
Figure 4-8-16 MLD SSM Information page screenshot
Description
VLAN ID of the group.
Group address of the group displayed.
User's Manual of WGSW-24040 / WGSW-24040R
173