Table of Contents
Advertisement
Buttons
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.
4.6.13 IP Subnet-based VLAN
The IP subnet-based VLAN enties can be configured here. This page allows for adding, updating and deleting IP subnet-based
VLAN entries and assigning the entries to different ports. This page shows only static entries. The IP-based VLAN screen in
Figure 4-6-19
appears.
The page includes the following fields:
Object
Delete
VCE ID
IP Address
Mask Length
VLAN ID
Port Members
Adding a New IP
subnet-based VLAN
Figure 4-6-19 Protocol to Group Mapping Table page screenshot
Description
To delete a Protocol to Group Name map entry, check this box. The entry will be
deleted on the switch during the next Save.
Indicates the index of the entry. It is user configurable. It's value ranges from
0-256. If a VCE ID is 0, application will auto-generate the VCE ID for that entry.
Deletion and lookup of IP subnet-based VLAN are based on VCE ID.
Indicates the IP address.
Indicates the network mask length.
Indicates the VLAN ID. VLAN ID can be changed for the existing entries.
A row of check boxes for each port is displayed for each IP subnet-based VLAN
entry. To include a port in a IP subnet-based VLAN, check the box. To remove or
exclude the port from the IP subnet-based VLAN, make sure the box is
unchecked. By default, no ports are members, and all boxes are unchecked.
Click "Add New Entry" to add a new IP subnet-based VLAN entry. An empty row
is added to the table, and the IP subnet-based VLAN entry can be configured as
needed. Any IP address/mask can be configured for the IP subnet-based VLAN
User's Manual of WGSW-24040 / WGSW-24040R
131
Advertisement
Table of Contents
