Table of Contents
Advertisement
Parameters:
<index>: entry index (1-64)
Example:
Lookup SNMPv3 community entry
WGSW-24040:/>security switch snmp community lookup
Idx Community
--- --------------------------------
1
public
2
private
Number of entries: 2
Security Switch SNMP User Add
Description:
Add SNMPv3 user entry.
The entry index key are <engineid> and <user_name> and it doesn't allow modify.
Syntax:
Security Switch SNMP User Add <engineid> <user_name> [MD5|SHA] [<auth_password>] [DES] [<priv_password>]
Parameters:
: Engine ID, the format may not be all zeros or all 'ff'H and is restricted to 5 - 32 octet string
<engineid>
: A string identifying the user name that this entry should belong to. The name of "None" is reserved.
<user_name>
The allowed string length is (1-32), and the allowed content is ASCII characters from 33 to 126
: An optional flag to indicate that this user using MD5 authentication protocol. The allowed length is
md5
: An optional flag to indicate that this user using SHA authentication protocol. The allowed length is
sha
(8-40), and the allowed content is ASCII characters from 33 to 126
<auth_password>: A string identifying the authentication pass phrase
: An optional flag to indicate that this user using DES privacy protocol privacy protocol should belong to.
des
The allowed string length is (8-32), and the allowed content is ASCII characters from 33 to 126
<priv_password>: A string identifying the privacy pass phrase.
The allowed string length is (8-40), and the allowed content is ASCII characters from 33 to 126
Example:
Add SNMPv3 user entry
Source IP
---------------
192.168.0.20
0.0.0.0
(8-32), and the allowed content is ASCII characters from 33 to 126
User's Manual of WGSW-24040 / WGSW-24040R
Source Mask
---------------
255.255.255.0
0.0.0.0
403
Advertisement
Table of Contents
