Port Management Command; Port Configuration; Port Mode - Planet Networking & Communication WGSW-24040 User Manual

6.3 Port Management Command

Port Configuration

Description:
Show port configuration.
Syntax:
Port Configuration [<port_list>] [up|down]
Parameters:
<port_list>: Port list or 'all', default: All ports
: Show ports, which are up
up
: Show ports, which are down
down
(default: Show all ports)
Example:
Display port1~4 status
WGSW-24040:/>port configuration 1-4
Port Configuration:
===================
Port State Mode
Description
---- -------- ----------- ------------ -------- -------- --------- ---- -----------
1 Enabled
2 Enabled
3 Enabled
4 Enabled

Port Mode

Description:
Set or show the port speed and duplex mode.
Syntax:
Port Mode [<port_list>] [auto|10hdx|10fdx|100hdx|100fdx|1000fdx|1000x_ams|1000x]
Flow Control MaxFrame Power
Auto Disabled
Auto Disabled
Auto Disabled
Auto Disabled
User's Manual of WGSW-24040 / WGSW-24040R
Excessive Link
9600 Disabled Discard
9600 Disabled Discard
9600 Disabled Discard
9600 Disabled Discard
357
Down
Down
Down
Down