Security Network NAS State
Description:
Set or show the port security state.
Syntax:
Security Network NAS State [<port_list>] [auto|authorized|unauthorized|single|multi|macbased]
Parameters:
<port_list>: Port list or 'all', default: All ports
: Port-based 802.1X Authentication
auto
authorized : Port access is allowed
unauthorized: Port access is not allowed
: Single Host 802.1X Authentication
single
: Multiple Host 802.1X Authentication
multi
: Switch authenticates on behalf of the client
macbased
(default: Show 802.1X state)
Default Setting:
none
Example:
Show the port 1 security state.
WGSW-24040:/>security network nas state 1
Port Admin State
---- ------------------ --------------------- ----------------- ------------------
1
Force Authorized
Security Network NAS Reauthentication
Description:
Set or show Reauthentication state.
Syntax:
Security Network NAS Reauthentication [enable|disable]
Parameters:
enable : Enable reauthentication
Port State
Last Source
Globally Disabled
422
User's Manual of WGSW-24040 / WGSW-24040R
Last ID
-
-