Dscp Classification - Planet Networking & Communication WGSW-24040 User Manual

The page includes the following fields:
Object
 DSCP
 Ingress
 Translate
 Classify
 Egress

Remap
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

4.9.10 DSCP Classification

This page allows you to map DSCP value to a QoS Class and DPL value. The DSCP Classification screen in
appears.
Description
Maximum number of supported DSCP values are 64 and valid DSCP value
ranges from 0 to 63.
Ingress side DSCP can be first translated to new DSCP before using the DSCP
for QoS class and DPL map.
There are two configuration parameters for DSCP Translation -
Translate
Classify
DSCP at Ingress side can be translated to any of (0-63) DSCP values.
Click to enable Classification at Ingress side.
There is following configurable parameter for Egress side -
Remap
Select the DSCP value from select menu to which you want to remap. DSCP
value ranges form 0 to 63.
194
User's Manual of WGSW-24040 / WGSW-24040R
Figure 4-9-12