Table of Contents
Advertisement
®
®
MNTR B - Moni-
tor A/B Select
Select either the A or
the B monitor to be
displayed on the meter,
to be controlled by
the fader, and to be
switched on and off by
the [ON] switch.
Monitor Fader
Control monitoring
volume level.
AFL and PFL
indication
These two LEDs show if
an active solo is a PFL
or an AFL.
Monitoring
Setup
Display the Monitor Set-
up Page on the master
screen.
Headphones
Level
Control the headphones
volume level.
Solo Trim
Trims source SOLO
Level.
4.3
10.1
Vi3000 USER MANUAL
Vi3000 USER MANUAL
Both Monitor A and B sources are always active -
(respecting their individual On/Off status'). The MTR B
button changes metering and control assignment.
The [SETUP] key glows blue when it is active.
The headphone output socket is located under the arm-
rest at the front of the console, and is designed for head-
phones with impedances in the range 50-600 Ohms.
This control is SOLO context sensitive. It is possible to
set a different trim for each of the 24 outputs in addition
to a global input solo trim level.
4.3: INPUT CHANNEL > DYNAMICS
10.1: MONITORING > CONTROL
Inactive
Monitor A
Range Low
-Infinty
Range Low
OFF
Range Low
-10dB
10.1: MONITORING > CONTROL
INPUT CHANNEL > De Esser
Active
Monitor B
Range High
+10dB
Active
SETUP Active
Range High
+20dB
Range High
+10dB
Advertisement
Table of Contents
