Cue Gpio Detail - SoundCraft Vi3000 User Manual

® ®
Selecting a the GPIO column in the cue list gives access to that cue's GPIO (General Purpose Input Output) settings.
The VST screen is split into GPI (input) and GPO (output) sections. The inputs section sets an input to be used as a
recall trigger for this cue, while the output section defines an output to be triggered when the cue is recalled. The cue
GPIO system uses 'virtual pins' that are mapped to physical pins in the master GPIO settings screen.
GPI On
Enable GPI triggering
for recall of this cue.
GPI Virtual Pin
Select
Select a virtual GPIO
pin as a recall trigger for
this cue.
4.3 14.3.4
Vi3000 USER MANUAL Vi3000 USER MANUAL

14.3.4: Cue GPIO Detail

4.3: INPUT CHANNEL > DYNAMICS 14.3.4: CUES > GPIO
Range Low
0
INPUT CHANNEL > De Esser 14.3.4: CUES > GPIO
Active
Enable GPI
for this cue
Range High
80