Table of Contents
Advertisement
®
Channel Input
Select
Field / Group: INPUT
Select either Input 1 or
Input 2 as the channel
input.
Oscillator Input
Select
Field / Group: INPUT
Assign the console's
central oscillator to the
input of this channel.
Input Gain
Field / Group: GAIN
Adjust the analogue
input gain.
Input Pad
Field / Group: GAIN
Reduce the input sensi-
tivity by 20dB.
Input Trim
Field / Group: TRIM
Adjust the digital input
gain.
Analogue Lo
Cut filter
Field / Group: TRIM
Insert the analogue (pre
AD converter) low cut
filter (only analogue
inputs).
6.5.1
Vi3000 USER MANUAL
The two physical channel inputs are assigned in the IN1
PATCH and IN2 PATCH fields.
When OSC is active, the normal input selections are
disabled and the corresponding input touch field is high-
lighted in orange.
This is an analogue gain stage, before analogue-to-digi-
tal conversion.
When the Pad is active, the PAD text in the input touch
field is highlighted in blue.
This is the post analogue-to-digital conversion gain, in
the digital domain.
When the analogue LO Cut filter is engaged, the LO Cut
symbol in the input touch field is highlighted in blue. This
filter affects analogue inputs only.
6.5.1: INPUT CHANNEL > INPUT
Range Low
IN 1
Inactive
off
Range Low
+10dB
Inactive
0dB
Range Low
-36dB
Inactive
Out
6.5.1: INPUT CHANNEL > INPUT
Range High
IN 2
Active
on
Range High
+65dB
Active
-20dB
Range High
+15dB
Active
In
Advertisement
Table of Contents
