Input Isolate; Level And Gr Meter; Input Channel Label; 'Pre' Indicator - SoundCraft Vi3000 User Manual

®

Input Isolate

Field / Group:
Used to isolate the
channel (and selec-
tions) from snapshot
recall and (when Global
Filtering is active) from
Show file loads.
Level and GR
Meter
Field / Group:
Level and gain reduc-
tion metering for the
input channel.
Input Channel
Label
Field / Group:
Displays the short label/
name of this channel.

'Pre' Indicator

Field / Group:
Reserved For Future
Use.
Channel ON/
OFF
Field / Group:
Channel [ON]/OFF but-
ton. 'OFF' is effectively
a mute control.
Mute Safe Indi-
cator
Field / Group:
Glows red when Mute
Safe is active for this
channel.
6.2
Vi3000 USER MANUAL
See the Snapshot and Global Filtering reference section
14 for more information.
See the metering reference section 12 for more informa-
tion.
The long and short channel labels are set in the chan-
nel's 'Input' Vistonics parameter block. See reference
section 6.5.1 for more information.
The button glows green when the channel is 'On'. If
the channel is off there is no glow colour. However, if
the channel is muted because a mute group has been
activated, the [ON] button will glow red.
When the Mute Safe system is enabled (in Monitoring
section [SETUP]), then the channel strip SOLO/SEL
button activates the Mute Safe status for the channel.
6.2: INPUT CHANNEL > CHANNEL STRIP
6.2: INPUT CHANNEL > CHANNEL STRIP
Inactive
Channel Off
Active
Isolate
Active
Channel On