®
®
Each input channel has an input meter and every input meter has two parts: A 20--segment level meter (top), and a
9-segment Gain Reduction Meter (GRM).
Both the measured point in the channel signal flow and the metering peak hold time can be selected in the main set-
tings screen (via the [MENU] button), in the (Settings) tab.
Input Level
Meter
Shows the input level
at the selected point in
the input channel signal
path.
Input Gain Re-
duction Meter
Shows the overall gain
reduction of the limiter
and compressor stages,
if they are engaged.
4.3
12.1
Vi3000 USER MANUAL
Vi3000 USER MANUAL
Input Channel Metering
The overload (OVL) LED indicates an overloaded ana-
logue input (mic preamp clipping).
4.3: INPUT CHANNEL > DYNAMICS
12.1: METERING > INPUTS
INPUT CHANNEL > De Esser
12.1: METERING > INPUTS